Ancient notation
Ancient notation
Adding a figured bass above or below the notes
When writing a figured bass, you can place the figures above or below
the bass notes, by defining the
BassFigureAlignmentPositioning.direction
property (exclusively
in a Staff
context). Choices are #UP
(or #1
),
#CENTER
(or #0
) and #DOWN
(or #-1
).
This property can be changed as many times as you wish. Use
\once \override
if you don’t want the override to apply to the
whole score.
bass = {
\clef bass
g4 b, c d
e d8 c d2
}
continuo = \figuremode {
<_>4 <6>4 <5/>4
\override Staff.BassFigureAlignmentPositioning.direction = #UP
%\bassFigureStaffAlignmentUp
< _+ >4 <6>
\set Staff.useBassFigureExtenders = ##t
\override Staff.BassFigureAlignmentPositioning.direction = #DOWN
%\bassFigureStaffAlignmentDown
<4>4. <4>8 <_+>4
}
\score {
<<
\new Staff = bassStaff \bass
\context Staff = bassStaff \continuo
>>
}
Ancient fonts
Shown here are many of the symbols that are included in LilyPond’s
ancient notation.
upperStaff = \new VaticanaStaff = "upperStaff" <<
\context VaticanaVoice <<
\transpose c c {
\override NoteHead.style = #'vaticana.punctum
\key es \major
\clef "vaticana-fa2"
c1 des e f ges
\override NoteHead.style = #'vaticana.inclinatum
a! b ces'
\bar "|"
\override NoteHead.style = #'vaticana.quilisma
b! des'! ges! fes!
\breathe
\clef "vaticana-fa1"
\override NoteHead.style = #'vaticana.plica
es d
\override NoteHead.style = #'vaticana.reverse.plica
c d
\bar "|"
\override NoteHead.style = #'vaticana.punctum.cavum
es f
\override NoteHead.style = #'vaticana.lpes
g as
\override NoteHead.style = #'vaticana.upes
bes as
\override NoteHead.style = #'vaticana.vupes
g f
\override NoteHead.style = #'vaticana.linea.punctum
\once \override Staff.BarLine.bar-extent = #'(-1 . 1) \bar "|"
es d
\override NoteHead.style = #'vaticana.epiphonus
c d
\override NoteHead.style = #'vaticana.cephalicus
es f
\set Staff.alterationGlyphs =
#alteration-medicaea-glyph-name-alist
\override Staff.Custos.style = #'medicaea
\override NoteHead.style = #'medicaea.punctum
\clef "medicaea-fa2"
ces des
\bar "|"
e! f! ges
\clef "medicaea-do2"
\override NoteHead.style = #'medicaea.inclinatum
a! b! ces'
\override NoteHead.style = #'medicaea.virga
b! a!
\bar "|"
ges fes
\clef "medicaea-fa1"
\override NoteHead.style = #'medicaea.rvirga
e des ces
\set Staff.alterationGlyphs =
#alteration-hufnagel-glyph-name-alist
\override Staff.Custos.style = #'hufnagel
\override NoteHead.style = #'hufnagel.punctum
\clef "hufnagel-fa2"
ces des es
\bar "|"
fes ges
\clef "hufnagel-do2"
\override NoteHead.style = #'hufnagel.lpes
as! bes! ces'
\override NoteHead.style = #'hufnagel.virga
bes! as!
\bar "|"
ges! fes!
\clef "hufnagel-do-fa"
\override NoteHead.style = #'hufnagel.punctum
es! des ces des! es! fes!
\bar "||"
s32*1
}
>>
>>
lowerStaff = \new MensuralStaff = "lowerStaff" <<
\context MensuralVoice <<
\transpose c c {
\key a \major
cis'1 d'\breve gis'\breve e'\breve \[ e'\longa fis'\longa \]
\set Staff.forceClef = ##t
\clef "neomensural-c2"
cis1
\bar "|"
\[ g\breve dis''\longa \]
b\breve \[ a\longa d\longa \]
\clef "petrucci-c2"
fis1 ces1
\clef "petrucci-c2"
r\longa
\set Staff.forceClef = ##t
\clef "mensural-c2"
r\breve
\bar "|"
r2
\clef "mensural-g"
r4 r8 r16 r16
\override NoteHead.style = #'mensural
\override Rest.style = #'mensural
\clef "petrucci-f"
c8 b, c16 b, c32 b, c64 b, c64 b,
d8 e d16 e d32 e d64 e d64 e
r\longa
\set Staff.forceClef = ##t
\clef "petrucci-f"
r\breve
\bar "|"
r\breve
\clef "mensural-f"
r2 r4 r8 r16 r16
\set Staff.forceClef = ##t
\clef "mensural-f"
e\breve f g a1
\clef "mensural-g"
\[ bes'!\longa a'!\longa c''!\longa \]
e'1 d' c' d' \bar "|"
\bar "|"
bes'!\longa fis'!1 as'!1 ges'!\longa % lig
\set Staff.forceClef = ##t
\clef "mensural-g"
e'2 d' c' \bar "|"
\set Staff.forceClef = ##t
\clef "petrucci-g"
c'2 d' e' f'
\clef "petrucci-g"
g' as'! bes'! cis''!
bes'! as'! gis'! fis'!
\set Staff.forceClef = ##t
\clef "mensural-g"
es'! des'! cis'!1 \bar "||"
}
>>
>>
\paper {
line-thickness = #(/ staff-space 5.0)
}
\score {
<<
\upperStaff
\lowerStaff
>>
\layout {
indent = 0.0
\context {
\Score
timing = ##f
}
\context {
\MensuralVoice
\override NoteHead.style = #'neomensural
\override Rest.style = #'neomensural
\override Flag.style = #'mensural
\override Stem.thickness = #1.0
}
\context {
\MensuralStaff
\revert BarLine.transparent
alterationGlyphs =
#alteration-mensural-glyph-name-alist
clefGlyph = #"clefs.petrucci.c2"
}
\context {
\VaticanaStaff
\revert BarLine.transparent
\override StaffSymbol.thickness = #2.0
alterationGlyphs =
#alteration-vaticana-glyph-name-alist
\override Custos.neutral-position = #4
}
}
}
Vorlage für Alte Notation – moderne Transkription des gregorianischen Chorals
Dieses Beispiel zeigt eine moderne Transkription des Gregorianischen
Chorals. Hier gibt es keine Takte, keine Notenhälse und es werden nur
halbe und Viertelnoten verwendet. Zusätzliche Zeichen zeigen die
Länge von Pausen an.
\include "gregorian.ly"
chant = \relative c' {
\set Score.timing = ##f
f4 a2 \divisioMinima
g4 b a2 f2 \divisioMaior
g4( f) f( g) a2 \finalis
}
verba = \lyricmode {
Lo -- rem ip -- sum do -- lor sit a -- met
}
\score {
\new GregorianTranscriptionStaff <<
\new GregorianTranscriptionVoice = "melody" \chant
\new GregorianTranscriptionLyrics = "one" \lyricsto melody \verba
>>
}
Ancient time signatures
Time signatures may also be engraved in an old style.
{
\override Staff.TimeSignature.style = #'neomensural
s1
}
Psalmennotation
Diese Form der Notation wird benutzt für die Notation von Psalmen, in denen
die Strophen nicht die gleiche Länge haben.
stemOff = \hide Staff.Stem
stemOn = \undo \stemOff
\score {
\new Staff \with { \remove "Time_signature_engraver" }
{
\key g \minor
\cadenzaOn
\stemOff a'\breve bes'4 g'4
\stemOn a'2 \section
\stemOff a'\breve g'4 a'4
\stemOn f'2 \section
\stemOff a'\breve^\markup { \italic flexe }
\stemOn g'2 \fine
}
}
Custodes
Custodes may be engraved in various styles.
\layout { ragged-right = ##t }
\new Staff \with { \consists "Custos_engraver" } \relative c' {
\override Staff.Custos.neutral-position = #4
\override Staff.Custos.style = #'hufnagel
c1^"hufnagel" \break
<d a' f'>1
\override Staff.Custos.style = #'medicaea
c1^"medicaea" \break
<d a' f'>1
\override Staff.Custos.style = #'vaticana
c1^"vaticana" \break
<d a' f'>1
\override Staff.Custos.style = #'mensural
c1^"mensural" \break
<d a' f'>1
}
Incipit
When transcribing mensural music, an incipit at the beginning of the
piece is useful to indicate the original key and tempo. While today
musicians are used to bar lines in order to faster recognize rhythmic
patterns, bar lines were not yet invented during the period of mensural
music; in fact, the meter often changed after every few notes. As a
compromise, bar lines are often printed between the staves rather than
on the staves.
%% With 2.23. this throws:
%% programming error: Loose column does not have right side to attach to.
%% Likely "Hidden BarLine during note yields programming error"
%% https://gitlab.com/lilypond/lilypond/-/issues/4084
%% --Harm
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% A short excerpt from the Jubilate Deo by Orlande de Lassus
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
global = {
\set Score.skipBars = ##t
\key g \major
\time 4/4
% the actual music
\skip 1*8
% let finis bar go through all staves
\override Staff.BarLine.transparent = ##f
% finis bar
\bar "|."
}
discantusIncipit = {
\clef "neomensural-c1"
\key f \major
\time 2/2
c''1.
}
discantusNotes = {
\transpose c' c'' {
\clef "treble"
d'2. d'4 |
b e' d'2 |
c'4 e'4.( d'8 c' b |
a4) b a2 |
b4.( c'8 d'4) c'4 |
\once \hide NoteHead
c'1 |
b\breve |
}
}
discantusLyrics = \lyricmode {
Ju -- bi -- la -- te De -- o,
om -- nis ter -- ra, __ om-
"..."
-us.
}
altusIncipit = {
\clef "neomensural-c3"
\key f \major
\time 2/2
r1 f'1.
}
altusNotes = {
\transpose c' c'' {
\clef "treble"
r2 g2. e4 fis g |
a2 g4 e |
fis g4.( fis16 e fis4) |
g1 |
\once \hide NoteHead
g1 |
g\breve |
}
}
altusLyrics = \lyricmode {
Ju -- bi -- la -- te
De -- o, om -- nis ter -- ra,
"..."
-us.
}
tenorIncipit = {
\clef "neomensural-c4"
\key f \major
\time 2/2
r\longa
r\breve
r1 c'1.
}
tenorNotes = {
\transpose c' c' {
\clef "treble_8"
R1 |
R1 |
R1 |
% two measures
r2 d'2. d'4 b e' |
\once \hide NoteHead
e'1 |
d'\breve |
}
}
tenorLyrics = \lyricmode {
Ju -- bi -- la -- te
"..."
-us.
}
bassusIncipit = {
\clef "mensural-f"
\key f \major
\time 2/2
r\maxima
f1.
}
bassusNotes = {
\transpose c' c' {
\clef "bass"
R1 |
R1 |
R1 |
R1 |
g2. e4 |
\once \hide NoteHead
e1 |
g\breve |
}
}
bassusLyrics = \lyricmode {
Ju -- bi-
"..."
-us.
}
\score {
<<
\new StaffGroup = choirStaff <<
\new Voice = "discantusNotes" <<
\set Staff.instrumentName = "Discantus"
\incipit \discantusIncipit
\global
\discantusNotes
>>
\new Lyrics \lyricsto discantusNotes { \discantusLyrics }
\new Voice = "altusNotes" <<
\set Staff.instrumentName = "Altus"
\global
\incipit \altusIncipit
\altusNotes
>>
\new Lyrics \lyricsto altusNotes { \altusLyrics }
\new Voice = "tenorNotes" <<
\set Staff.instrumentName = "Tenor"
\global
\incipit \tenorIncipit
\tenorNotes
>>
\new Lyrics \lyricsto tenorNotes { \tenorLyrics }
\new Voice = "bassusNotes" <<
\set Staff.instrumentName = "Bassus"
\global
\incipit \bassusIncipit
\bassusNotes
>>
\new Lyrics \lyricsto bassusNotes { \bassusLyrics }
>>
>>
\layout {
\context {
\Score
%% no bar lines in staves or lyrics
\hide BarLine
}
%% the next two instructions keep the lyrics between the bar lines
\context {
\Lyrics
\consists "Bar_engraver"
\consists "Separating_line_group_engraver"
}
\context {
\Voice
%% no slurs
\hide Slur
%% Comment in the below "\remove" command to allow line
%% breaking also at those bar lines where a note overlaps
%% into the next measure. The command is commented out in this
%% short example score, but especially for large scores, you
%% will typically yield better line breaking and thus improve
%% overall spacing if you comment in the following command.
%%\remove "Forbid_line_break_engraver"
}
indent = 6\cm
incipit-width = 4\cm
}
}
Mensurstriche-Layout (Taktstriche zwischen den Systemen
Das Mensurstiche-Layout, in welchem die Taktlinien nicht auf den Systemen,
sondern zwischen den Systemen gesetzt werden, kann mit einer StaffGroup
anstelle von ChoirStaff
erreicht werden. Die Taktlinien auf den
Systemen werden mit der transparent
-Eigenschaft ausgelöscht.
\layout {
\context {
\Staff
measureBarType = "-span|"
}
}
music = \fixed c'' {
c1
d2 \section e2
f1 \fine
}
\new StaffGroup <<
\new Staff \music
\new Staff \music
>>
Pausenstile
Pausen können in verschiedenen Stilen dargestellt werden.
\new Staff \relative c {
\omit Score.TimeSignature
\cadenzaOn
\override Staff.Rest.style = #'mensural
r\maxima^\markup \typewriter { mensural }
r\longa r\breve r1 r2 r4 r8 r16 s32 s64 s128 s128
\bar ""
\break
\override Staff.Rest.style = #'neomensural
r\maxima^\markup \typewriter { neomensural }
r\longa r\breve r1 r2 r4 r8 r16 s32 s64 s128 s128
\bar ""
\break
\override Staff.Rest.style = #'classical
r\maxima^\markup \typewriter { classical }
r\longa r\breve r1 r2 r4 r8 r16 r32 r64 r128 s128
\bar ""
\break
\override Staff.Rest.style = #'z
r\maxima^\markup \typewriter { z-style }
r\longa r\breve r1 r2 r4 r8 r16 r32 r64 r128 s128
\bar ""
\break
\override Staff.Rest.style = #'default
r\maxima^\markup \typewriter { default }
r\longa r\breve r1 r2 r4 r8 r16 r32 r64 r128 s128
}
Using tags to produce mensural and modern music from the same source
Using tags, it is possible to produce both mensural and modern
notation from the same music. In this snippet, a function
menrest
is introduced, allowing mensural rests to be pitched as
in the original, but with modern rests in the standard staff position.
Tags can also be used where other differences are needed: for example
using „whole measure rests“ (R1
, R\breve
, etc.) in
modern music, but normal rests (r1
, r\breve
, etc.) in
the mensural version. Converting mensural music to its modern
equivalent is usually referred to as „transcription“.
menrest = #(define-music-function (note)
(ly:music?)
#{
\tag #'mens $(make-music 'RestEvent note)
\tag #'mod $(make-music 'RestEvent note 'pitch '())
#})
MenStyle = {
\autoBeamOff
\override NoteHead.style = #'petrucci
\override Score.BarNumber.transparent = ##t
\override Stem.neutral-direction = #up
}
finalis = \section
Music = \relative c'' {
\set Score.tempoHideNote = ##t
\key f \major
\time 4/4
g1 d'2 \menrest bes4 bes2 a2 r4 g4 fis2.
\finalis
}
MenLyr = \lyricmode { So farre, deere life, deare life }
ModLyr = \lyricmode { So far, dear life, dear life }
\score {
\keepWithTag #'mens {
<<
\new MensuralStaff
{
\new MensuralVoice = Cantus
\clef "mensural-c1" \MenStyle \Music
}
\new Lyrics \lyricsto Cantus \MenLyr
>>
}
}
\score {
\keepWithTag #'mod {
\new ChoirStaff <<
\new Staff
{
\new Voice = Sop \with {
\remove "Note_heads_engraver"
\consists "Completion_heads_engraver"
\remove "Rest_engraver"
\consists "Completion_rest_engraver" }
{
\shiftDurations #1 #0 { \autoBeamOff \Music }
}
}
\new Lyrics \lyricsto Sop \ModLyr
>>
}
}
Vertical line as a baroque articulation mark
This short vertical line placed above the note is commonly used in
baroque music. Its meaning can vary, but generally indicates notes
that should be played with more „weight“. The following example
demonstrates how to achieve such a notation.
upline =
\tweak stencil
#(lambda (grob)
(grob-interpret-markup grob #{ \markup \draw-line #'(0 . 1) #}))
\stopped
\relative c' {
a'4^\upline a( c d')_\upline
}